Frontier Fire is now an authorized distributor of ANSUL products. ANSUL designs and manufactures special hazard fire protection products that are distributed worldwide to over 1000 fire protection professionals.
Every authorized distributor is ANSUL-trained through regular, in depth product training courses to ensure they understand how each piece of equipment should be installed.
Distributors are also tested on the design and service of each fire suppression product to make sure they understand how both older and new products work at all times. Through these trainings, ANSUL helps distributors continue to grow and become experts in the fire protection industry.
Now that Frontier Fire is an ANSUL authorized distributor, we can offer a wider range of equipment including fire suppression systems made specifically for water sensitive rooms. If you have a data center or store sensitive equipment, ANSUL products are perfect for you.
About ANSUL Clean Agent Products
ANSUL offers everything from fire extinguishers to fire detection and suppression systems. All of their fire suppression products use clouds or chemicals rather than water to prevent damage to electrical systems.
Using a water based fire suppressant for rooms that store electronics or sensitive items could leave the room in worse condition once the fire is suppressed. That's why ANSUL decided to create clean-agent systems that are custom built to quickly put out a fire and not cause harm to equipment, people, or the room.
ANSUL's Clean Agent products include:
Those responsible for managing and protecting high-value assets, processes, and facilities demand the quality fire suppression offered by the ANSUL FM-200 Clean Agent Fire Suppression System. FM-200 systems are internationally accepted as providing reliable, effective, affordable fire protection solutions for applications found in telecommunication sites, data centers and archives, museums, oil and gas facilities, power plants, and more.
The ANSUL FM-200 Clean Agent Fire Suppression System is approved by Factory Mutual (FM) and listed by Underwriters Laboratories (UL) for Class A, B and C fires. Safe for use in occupied areas at the design concentration, the system helps protect critical infrastructure and delivers effective asset protection.
The system uses FM-200 (HFC-227ea) fire extinguishant which has zero ozone depletion (ODP). This colorless, odorless agent vaporizes upon discharge and absorbs heat to rapidly suppress fire while leaving no residue to clean up. It is electrically nonconductive, will not short-out electronic equipment or thermally shock delicate circuitry resulting in less damage to critical equipment, facilitating a much shorter recovery time and reducing downtime
Using water as a fire suppressant in areas where electronics operate and irreplaceable, high-value assets are stored, could be as devastating as fire itself. The SAPPHIRE Clean Agent System quickly suppresses fires and protects sensitive equipment without causing harm to people or the environment. The system is especially suited to suppress fires in areas where an electrically non-conductive medium is required, where electronic systems cannot be shut down in an emergency, where cleanup of other agents poses a problem, and in normally occupied areas that demand a non-toxic agent.
The SAPPHIRE system uses 3M Novec 1230 fire protection fluid for total flooding applications. The clear, colorless agent has zero ozone depletion potential, an atmospheric lifetime of just five days, and a global warming potential of 1.0. The SAPPHIRE system suppresses a fire before it can be fully engaged and once the fire is suppressed, Novec 1230 quickly evaporates without harming any valuable assets.
The fluid can be used in total flooding fire suppression applications such as:
- Data processing centers
- Tape storage vaults
- Occupied or unoccupied electronic areas with very sensitive or irreplaceable equipment
- Telecommunications including cellular sites and switching centers
- Military systems including combat vehicles and marine engine rooms
- Transportation including merchant marine vessels and mass transit vehicles
- Recreation including pleasure craft and race cars
INERGEN SYSTEMS -- 150-BAR & 200-BAR
The INERGEN Fire Suppression System protects enclosed areas where people may be present, fire may strike day or night, and damage from conventional agents cannot be tolerated. Upon discharge, INERGEN agent fills the room, mixing with the air to suppress fires quickly and effectively.Safe for people, INERGEN agent is non-synthetic and made of naturally occurring gases: nitrogen, argon, and carbon dioxide. Once discharged, it returns to the atmosphere in its natural state.
INERGEN agent is free of residues and corrosive by-products that may produce further property damage. And because it poses no ozone depleting or global warming threat, INERGEN agent will never be subject to future legislative bans.
All of ANSUL's products are made according to strict standards. They are also tested in national and international approval agencies and independent testing laboratories to ensure they're up to par.
Call in an ANSUL Authorized Distributor
Are you ready to get top of the line equipment installed in your workplace? Now that Frontier Fire is a trained and authorized ANSUL distributor, we can efficiently install any fire protection devices you need. Give us a call today and set up a time to take your business to the next level through high quality fire safety and protection systems.